Full and reduced-order H∞ filtering of Takagi–Sugeno fuzzy time-varying delay systems: Input–output approach

This article addresses the issue of delay-dependent H_∞ filtering design for TakagiŮSugeno fuzzy time-varying delay systems using the input–output approach. A three-term approximation model has been used to transform the original system into two interconnected subsystems. Since the nonquadratic Lyapunov–Krasovskii functional requires to deal with the membership function's (MF) time derivative, upper-bound inequalities have been added to the obtained conditions. Based on the scaled small gain theorem, nonquadratic Lyapunov–Krasovskii functional approach and considering the bounds of the MF time-derivative, the H_∞ full- and reduced-order filters are designed and then formulated in terms of linear matrix inequalities. Finally, illustrative examples are presented to demonstrate the validity of the proposed methods.     

Core–shell NTC materials with low thermal constant and high resistivity for wide-temperature thermistor ceramics

Core–shell structures have been proposed to improve the electrical properties of negative-temperature coefficient (NTC) thermistor ceramics. In this work, Al₂O₃-modified Co_1.5Mn_1.2Ni_0.3O₄ NTC thermistor ceramics with adjustable electrical properties were prepared through citrate-chelation followed by conventional sintering. Co_1.5Mn_1.2Ni_0.3O₄ powder was coated with a thin Al₂O₃ shell layer to form a core–shell structure. Resistivity (ρ) increased rapidly with increasing thickness of the Al₂O₃ layer, and the thermal constant (B) varied moderately between 3706 and 3846 K. In particular, Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ ceramic with 0.08 wt% Al₂O₃ showed the increase of ρ double, and the change in its B was less than 140 K. The Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ NTC ceramics showed high stability, and their grain size was relatively uniform due to the protection offered by the shell. The aging coefficient of the ceramic was less than 0.2% after aging for 500 hours at 125°C. Taken together, the results indicate that as-prepared Co_1.5Mn_1.2Ni_0.3O₄@Al₂O₃ NTC ceramics with a core–shell structure may be promising candidates for application as wide-temperature NTC thermistor ceramics.     

The effects of surface-modified graphene nanoplatelets on the sliding wear properties of basalt fibers-reinforced epoxy composites

Possessing unique designs and properties absent in conventional materials, nanocomposites have made a remarkable imprint in science and technology. This is particularly true regarding the polymer matrix composites when they are further reinforced with nanoparticles. In this study, the effects of different weight percentages (0, 0.1, 0.2, 0.3, 0.4, and 0.5) of surface-modified graphene nanoplatelets (GNPs) on the microhardness and wear properties of basalt fibers/epoxy composites were investigated. The GNPs were surface modified by silane, and the composites were made by the hand lay-up method. The wear tests were conducted under two different loads of 20 and 40 N. The best wear properties were achieved at 0.3 wt % GNPs as a result of the GNPs' self-lubrication property and the formation of a stable transfer/lubricating film at the pin and disk interface. Moreover, the friction coefficient was lower at the higher normal load of 40 N. The microscopic studies by FESEM and SEM showed that the presence of GNPs up to 0.3 wt % led to the stability of the transfer/lubricating film by enhancing the adhesion of the basalt fibers to the epoxy resin. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47986.     

基于多特定决策类的不完备决策系统正域约简

现有的属性约简方法大部分关注决策系统中的所有决策类，而在实际决策过程中决策者往往仅关注决策系统中的一种或几种决策类。针对上述问题，提出基于多特定决策类的不完备决策系统正域约简的理论框架。首先，给出不完备决策系统单特定决策类正域约简的概念；第二，将单特定决策类正域约简推广到多特定决策类，构造了相应的差别矩阵及区分函数；第三，分析并证明了相关定理，提出基于差别矩阵的不完备决策系统多特定决策类正域约简算法（PRMDM）；最后，选取4组UCI数据集进行实验。在数据集Teaching-assistant-evaluation、House、Connectionist-bench和Cardiotocography上，基于差别矩阵的不完备决策系正域约简算法（PRDM）的平均约简长度分别为4.00、13.00、9.00和20.00，PRMDM算法（多特定决策类中决策类数目为2）的平均约简长度分别为3.00、8.00、8.00和18.00。实验结果验证了PRMDM算法的有效性。     

吸收烟气中低浓度CO2的操作条件分析

Mg(OH)2浆液是一种具备低再生能耗潜力的CO2吸收剂，为了推进其在CO2捕集领域的应用而展开研究。在填料塔中，使用真实烟气研究了各种操作条件下Mg(OH)2浆液对CO2的捕集效率。研究发现,填料种类、气体名义停留时间、液气比均对CO2捕集效率有影响。结果表明，增加气体名义停留时间无法有效改善液相传质，而提高液气比能够有效改善液相传质；在试验条件下，拉西环、鲍尔环和IMTP的总体积传质系数分别为8.5×10-7～5.0×10-6、1.8×10-6～4.0×10-6和1.9×10-7～2.9×10-6 mol/(m3·s·Pa)。     

High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

基体稀释或基体匹配石墨炉原子吸收光谱法测定土壤样品中铅和镉

用石墨炉原子吸收光谱法测定土壤样品中Pb和Cd时,有时候直接按照方法标准GB/T 17141—1997操作,测定结果不能满足质控要求。研究结果表明,目标元素系列标准溶液中,分别含和不含土壤基体元素Na、Mg、Al、Si、Fe、Ca等元素混合成分时,校准曲线斜率明显不同。为减小基体效应的影响,基于文献调研和实验结果,对上述方法标准实验步骤进行了下列改进:(1)取相同体积实际样品消解液混合后,定量加入到用于建立校准曲线的系列标准溶液中,用于基体匹配;(2)对消解液进行适度稀释,仍采用标准溶液建立校准曲线。用4个土壤标样和土壤样品加标测定结果对改进后的方法进行了验证,结果表明,基体稀释法测定Pb的回收率范围分别为90.4%~114%;测定低含量Cd时,回收率范围为84.1%~125%。基体匹配法测定Pb和Cd的回收率范围分别为93.0%~105%和102%~119%,基本满足土壤样品中重金属回收率为80%~120%的质控要求。样品中痕量镉在测定下限附近时,应严格控制稀释倍数,或采用基体匹配法测定。改进后的操作步骤适合日常检测工作中大批量土壤样品中Pb和Cd的准确测定。     

工业硝酸铵添加剂对乳胶基质的影响

为了改善工业硝酸铵的吸湿结块性能,通常会加入添加剂(有机包覆剂或无机改性剂),而工业硝酸铵作为乳化炸药的主要原料,其添加剂对乳化炸药的制备和性能会产生影响。因此,分别对采用有机包覆剂蜡的泰国产工业硝酸铵和采用无机改性剂的俄罗斯产工业硝酸铵,开展了制备现场散装乳胶基质的工业试验。结果表明:两类工业硝酸铵均可作为乳化炸药原材料使用,但有机包覆剂会沉入水相罐底部或粘附在输送管道内壁,对水相和乳胶基质制备造成不利影响,因此需要在水相制备环节分离去除包覆剂蜡;硝酸镁、硝酸钙等无机改性剂对乳胶基质制备无影响,但生产的乳胶基质稳定性较差,通过调整乳化剂的种类和配比以及乳化器的转速可得到一定改进。     

一种基于压缩感知的运动目标检测技术

运动目标检测是计算机视觉、图像处理等相关领域的研究热点，其核心就是对视频图像中的每一帧图像进行相应的研究和处理。本文主要研究思路是从压缩感知技术采样信号的角度出发，将每一帧的二维图像压缩采样成具有少量信息的一维信号，再通过信号重构用少量数据量将图像重构出来，最后通过目标检测技术对每一帧的图像进行运动目标提取。仿真实验表明该方法是可行和有效的，同时可以大大减少目标检测中所记录的数据量，解决海量数据的存储与传输问题。